Scrambler82
Old Bastard !
Joined: Fri Dec 22nd, 2017
Posts: 2108
Name: Grev B ... Occupation: Quality Assurance Engineer ... Interests: Rangers, Photography, Metal Bending ...
Reputation Points: 2108
|
JAMMAN wrote:
Nope mine is in a short cab. The tab is in a different place on short cabs as long cabs AND there are 2 different dome lights for the ranger in general, one with the center light and one without. Covers are exactly the same they look the same and the one without the center light still has the reflector in the middle just no socket or no light. Seen it with my own eyes.
I don't know for sure, but so far the screws (which carry the electric to this assembly) have been in the exact same location every dome I have examined expo or ranger. Can't confirm this since I have only seen a dozen or so but the evidence is real. The tabs I believe are just for speedy assembly in the factory, just break it off and you have a universal dome light.
The screws were longer in my short cab than they were in the explorer, I had to use the ranger screws.
So what Interior Lights fit the single cab, and which one did you use ?
I probably won't need a larger rear overhead once the OHC Lighting once the wiring is hooked up, I have a two center LED Panels, which WILL at sometime in the future light up together and then it is divided for the lap lights on separate switches.
Just interested for future projects !
Ltr
____________________
Ltr,
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Hurst Shifter
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !
|
