Scrambler82
Old Bastard !
Joined: Fri Dec 22nd, 2017
Posts: 2108
Name: Grev B ... Occupation: Quality Assurance Engineer ... Interests: Rangers, Photography, Metal Bending ...
Reputation Points: 2108
|
Mike69 wrote:
We also have 4 sockets across the inside ceiling which we installed led lights. There are also outlets up high on the side walls where I am going to plug in 4' long led lights to be mounted to the angled beams to point down at an angle for more light on the floor. We are going to install drywall on the walls up 8' & see what that looks like to determine whether we want to go all the way up the walls or not.
Sounds good !
I was thinking... while reading, SMOKE come out of my ears, before insulation/wall board, maybe put in some nailing/screw strips, so you can mount shelving... if needed; it would be easier now !
You could secure them between the uprights in the walls, screw through the uprights and into the Nailing strips. The size of the Nailing Strips would be based on what you want to do, me... (always have ideas)... I would put in 2x6's, that way they will have a little more stability and you can add 2x4s or Shelf Strips after the wall boards are up.
Just me thinking out loud AGIAN !
Not trying to tell you what to just suggesting things BEFORE the insulation/wall board is in place and you realize there is no where to mount the shelving... ask me how I know !
p.s. I posted the Post and thought yet again.
Finish the ceiling, paint it white... good light reflexion.
AND did you consider any skylights ?
I added six translucent light panels in the roof area of my Metal Barn... I don't need to turn the lights on in the Barn until the sun has set.
I'm done on this pass.Last edited on Mon Apr 4th, 2022 04:07 pm by Scrambler82
____________________
Ltr,
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Hurst Shifter
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !
|
MG power
