Undrstm8ed
Seasoned...
Joined: Sat Oct 21st, 2017
Posts: 1295
Name: Occupation: Interests: Life, Experiences, and adventures. ...
Reputation Points: 1295
|
As titled, I need a replacement intake tube from the TB to the Airbox itself.
My biggest concern is the condition of the rubber seals at both ends that slip over the end of the harder plastic tube but grab onto the TB and MAF bodies. My TB seal was nearly swallowed by the TB this past week getting caught in the TB making the engine race to 3000-3500 RPM's and it has a gap now as its been torn out of place. Even with it clamped down as tight as I can get it, it throws MAF voltage codes because air is leaking after the MAF once in awhile so it needs replacing..
If you just have the seals for the ends, that's cool. But if you have the whole thing to get rid of, I don't mind purchasing the whole thing. If you want to get a jump on shipping ideas - 89118
____________________
"Be never first, never last and never noticed." - Unknown
"The slave is held most securely when he is held by the chains of his own will and of his own fears, and when he is locked down by his own slavish desires for a comfortable life." - Michael Bunker
"Mundus vult decipi, ergo decipiatur" - ~ attributed to Petronius (Gaius Petronius Arbiter (ca. 27–66 AD))
Roman courtier during the reign of Nero.
"Those who expect to reap the blessings of freedom, must, like men, undergo the fatigue of supporting it." - Thomas Paine
~ Undrstm8ed Truckumentry Write Up Pg.
~ Undrstm8ed Trailermentry Write Up Pg.
.
|
