Cool pup! Thanks!!:cheers ...   Tue Nov 13th, 2018 09:17 pm

Stacks, snorkles, phantom trailer mirrors, and truck nuts. Mandatory decoration for any truck in a trailer park somewhere. Redneck looking for a place to happen.:whatever: ...   Thu Nov 1st, 2018 08:47 am

Ordinary Biker wrote: johnday wrote: If you think that's impressive, wait for 2021. This version is to be replaced by a completely different version then, and a ...   Wed Oct 31st, 2018 07:14 am

If you think that's impressive, wait for 2021. This version is to be replaced by a completely different version then, and a 2.7 is likely ...   Tue Oct 30th, 2018 05:38 pm

I've found that Dorman is pretty much hit and miss as far as many electrical components. Common to Rangers, I changed out my resistor block a ...   Tue Oct 30th, 2018 11:28 am

Gotcha, it would be interesting to follow a build like that though. ...   Sun Oct 21st, 2018 07:19 pm

Eddie, have you gone ahead with this?  There were some younger guys across the street where I used to live that had one of these projects. ...   Sun Oct 21st, 2018 04:29 pm

I think most here think dogs are the greatest, so post them up with any description, funny story, anything related.  I'll try to start.  This is Seamus, ...   Sun Oct 21st, 2018 04:17 pm

johnday wrote: Took my adopted new best buddy for a ride. I lost my last best friend a year ago, and found this guy at the ...   Sun Oct 21st, 2018 04:00 pm

Let's see if this works, Seamus, the day I got him. ...   Sat Oct 20th, 2018 11:47 am

Thank you, hopefully I can get some photos up soon. "Ranger", good name!! ...   Fri Oct 19th, 2018 07:57 am

Don't know what I'm doing wrong, I can't even edit the previous post. ...   Wed Oct 17th, 2018 05:39 pm

Took my adopted new best buddy for a ride. I lost my last best friend a year ago, and found this guy at the local ...   Wed Oct 17th, 2018 05:26 pm

JAMMAN wrote: Gave it a bath today. This is a nasty little truck I truly beleive it is the first time it has been washed in ...   Thu Oct 11th, 2018 09:11 am

JAMMAN wrote: johnday wrote: Jim, got that cylinder out! Bloody manual says nothing about the locking slide  is able to be pulled thru from the outside of ...   Thu Oct 11th, 2018 09:09 am

Replaced my alternator and drive belt. I used a Continental belt. Finally solved my high idle problem when warmed up. Took some Fluid Film on the ...   Wed Oct 10th, 2018 09:53 am

Jim, got that cylinder out! Bloody manual says nothing about the locking slide  is able to be pulled thru from the outside of the jam.:verymad ...   Fri Oct 5th, 2018 07:01 pm

Didn't get a chance to try popping that lock cylinder, but did get my LEDs from Buggman installed, and the Ranger driveable again. Thanks Terry, they ...   Thu Oct 4th, 2018 07:15 pm

I asked that same question, on the other site. Got pretty well ignored IIRC. My buddy at the dealer builds trucks,and sells them there. He ...   Thu Oct 4th, 2018 11:14 am

JAMMAN wrote: `I pull the clip first. Then I pull the lock cylinder to the outside with the rod still in it. You have to twist ...   Thu Oct 4th, 2018 11:03 am

JAMMAN wrote: Easy. I'm going to do the right soon I'll take a vid or shoot pictures. Cool that would be great! black06xlt wrote: johnday wrote: Jim, how did you ...   Thu Oct 4th, 2018 07:03 am

Jim, how did you install the door lock? I've got salvaged right door for my truck, and need to flipflop the key cylinders. No big ...   Wed Oct 3rd, 2018 11:48 am

All of mine have been called the same thing at one time or another, usually when stuck, having trouble with, etc. Usually comes out as ...   Sun Sep 30th, 2018 11:12 pm

Ahh, just throw some POR15 on 'em, oughta last another 100 miles.:cheers ...   Sun Sep 30th, 2018 07:21 pm

Sounds like a couple good guys recovered it for you, good for them! ...   Sat Sep 29th, 2018 09:03 pm

Ya, that's pretty normal, both my Ranger and my '17 150 are off, as were a few other trucks I've had. Seems it's a built ...   Sat Sep 29th, 2018 06:56 pm

Taking my instrument panel and HVAC controls out, replacing lights with Buggman specials when they get here. ...   Sat Sep 29th, 2018 10:31 am

Thanks Mike! Got him, he's sending me some.  ...   Sat Sep 29th, 2018 08:24 am

I need new LED 2721 lights for my little truck. I got some a couple years ago from BUGGMAN. Does anyone know if he still ...   Fri Sep 28th, 2018 03:14 pm

Mike69 wrote: X2, welcome back. Thanks Mike! ...   Fri Sep 28th, 2018 03:11 pm

JAMMAN wrote: Man you had us worried, welcome back  :) Thanks Jim, you know the olde saying, the good die,,,,,,,,,,,,I'll likely be around to at least hundred!!!!;) ...   Fri Sep 28th, 2018 12:31 pm

Hey guys, thought it was about time I showed back up. Been a while, and I need to re familiarize myself with the site. Got ...   Fri Sep 28th, 2018 09:05 am

Got the LSD installed yesterday, and played with it a bit on a dirt road, yep, it works. Also replaced the carrier bearings/races, and axle ...   Tue Nov 7th, 2017 10:34 am

Undrstm8ed wrote: Agreed.. I even can state the same thing for being 2WD and going where some of the bigger and 4WD trucks go.. Ground ...   Sun Oct 29th, 2017 01:09 pm

CBB9M wrote: johnday wrote: Like for example, if you're not paying attention and you are giving it a bit of gas on an icy corner, ...   Sat Oct 28th, 2017 03:54 pm

JAMMAN wrote I have noticed this about drivers... having spent most of my life in Michigan when it snows a little down here (Columbus Ohio) ...   Sat Oct 28th, 2017 03:51 pm

MaDMaXX wrote: Wow, i'd love to fit LSD to my '02 Edge - 4.10 open doesn't seem like a great idea in the snow. I'm guessing ...   Sat Oct 28th, 2017 09:03 am

JAMMAN wrote: OK you said it is a "ford unit" already set up... is it out of a Ranger, and is it out of a ...   Sat Oct 28th, 2017 08:58 am

CBB9M wrote: I believe that right way to do it is to use either your current ("matched by wear pattern") ring/pinion combo or get the ...   Fri Oct 27th, 2017 02:26 pm

Working on my new truck today up at my mechanics shop, we got talking Rangers, particularly mine. Turns out, he's got an 8.8 LSD assembly ...   Thu Oct 26th, 2017 06:33 pm