Scrambler82
Old Bastard !
Joined: Fri Dec 22nd, 2017
Posts: 2108
Name: Grev B ... Occupation: Quality Assurance Engineer ... Interests: Rangers, Photography, Metal Bending ...
Reputation Points: 2108
|
Mike69 wrote:
Can you take a picture of it & post it so I can see if there is enough room for me to mount a small led for a puddle light & also maybe come up with an idea of where you can mount your extra mirror.
Mike, here is what I got !
Straight shot in !
The wires I have added, the connector is for the directionals, the other two wires are for the Heat and then I still need to add two wires for the Puddle lights.
This one shows the Outer Side and Bottom Depth.
Bottom is approximately 3" deep, Motor is approximately 2.5". (My measurements might be wrong, I can redo if necessary).
The Out Side is the same depth on the lower portion and tapers a little.
Just leave room for the Glass movement on the outside edge, the inside edge is pretty packed. See first pic.
I have found the glass is out more on the outer side of the mirror that I have adjusted on other rangers.
I have an LED Light to add also, my plan is as far out and as far... "towards the front of the housing, as possible... watch the taper on the side and the radius on front edge.
Is the front really the back of the mirror housing... or is the back of the housing the front ? LoL !
You decide, you can see !Last edited on Fri Apr 10th, 2020 12:33 am by Scrambler82
____________________
Ltr,
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Hurst Shifter
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !
|
1 2 3 
Here is a pic of the drivers side mirror glass, if you look closely you can see 2 of the rust spots on the glass.