New Audio On The Way !
Joined: Fri Dec 22nd, 2017
Name: Grev B
Occupation: Quality Assurance Engineer
Interests: Rangers, Photography, Metal Bending
Reputation Points: 2475
The bed has a crack on the left, hard to see from the pic I didn't take of it.
I've never worked with fiberglass is it easy or a pain in the butt?
Working with Fiberglass is messy but not hard, time consuming, and very dusty from the sanding... wear a good mask ! That shouldn't be a problem !
I found easiest... work with as flat a piece as possible; so take the bed side off, just a few torx bolts.
Make sure you start with a flat area, and get some of the resin the crack itself !
Reinforce on the inside.
Just my way !
Last edited on Mon Jun 22nd, 2020 03:13 am by Scrambler82
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK.
Working on more Mods, just need more time, longer days would work !