| PM | Quote | Reply | Full Topic |
Mean 3.0
Joined: Wed Nov 8th, 2017
Posts: 26
Status:
Offline
Reputation: 
Reputation Points: $user_rep
:)
____________________
00' EXT CAB XLT 3.0 2x4
| View single post by 3.0Ranger | |||||||||
| Posted: Mon Mar 5th, 2018 08:52 am |
|
||||||||
|
3.0Ranger Mean 3.0 Joined: Wed Nov 8th, 2017
Posts: 26
Status:
Offline
Reputation: Reputation Points: $user_rep
|
I fixed the issue. A friend had a system in his truck he had 2 12'' subwoofers in his truck also with a better quality amp. So how we figured out the problem was. We were gonna single out the problem. By using his amp on my subs and if it worked and didn't go into protect mode that would show it as my amp was the issue. Or using my amp on his subs and if it worked that would show it would be a subwoofer issue. So what we did first is hooked his subwoofers to my amp which his subwoofers are running at 2ohm just how I have my subs wired. So once we hooked everything up using his subs and my amp it worked perfect we could cut the settings all the way up and it would play high and low notes fine with the amp settings all the way up. So at that point we were like ok that means it had to be a subwoofer wiring issue. But just for the hell of it I said could we use your amp and my subs and he said sure. So we took his amp and plugged it up and it played everything fine we cut the settings up slowly but we could cut them all the way up so were confused. So we were like what's the issue and the only thing that made since was my original amp just couldn't power my subs. Because his amp worked with my subs and we could cut everything up. But my amp and his subs worked fine also. But his subs don't need near as much power as my subs so in the end we just traded amps and everything works fine now.:)
____________________ 00' EXT CAB XLT 3.0 2x4 |
||||||||
|
| |||||||||