View single post by NewShockerGuy

Posted: Fri Jan 12th, 2018 10:37 pm

Quote

Full Topic

NewShockerGuy

Joined: Mon Oct 23rd, 2017

Location: Virginia USA

Posts: 144

Status:

Offline

Reputation:

Reputation Points: $user_rep

Member's Gallery

Got the new snapon t55 bit today. Attempted to remove front most two longer bolts. SUCCESS!! I guess spraying the bolts down 3 times a day with Kroil helped... They were still a little hard but all done by hand with a 3/8 ratchet. I am going to clean up the threads then put ant seize on them before I put them back on. Should make going back in and removal if I have to do it later much much easier.

Now to move the bed off or back in the morning and change the fuel pump. It's a shame I couldn't do it today while it was 60 degrees but it's going to be 40 tomorrow, so I'll take that over 10 degrees. Getting a little bit closer.

I also checked fuel pressure and tried to crank it. Reads zero. Checked the relay with a test light and I did get 12v at the relay.

-Nigel

____________________
__________
2001 XLT 2.3L

~NSG~