View single post by mhoward

Posted: Thu Dec 14th, 2017 10:06 pm

Quote

Full Topic

mhoward
Hey look ~ they ~ bounce!

Joined: Sun Oct 22nd, 2017

Location: Evansville, USA

Posts: 2736

Status:

Offline

Reputation:

Reputation Points: $user_rep

Member's Gallery

My EDGE had the standard 60/40 cloth seats. I originally did the 40/40 mod on them... then Cameron scored the leather monty seats. I tossed them in temporarily to make sure I wanted them, then wired them permanently.

Yes, tapped the existing hole; it was the right size, just needed threads. Cut the sliding rail off and threw it away. Only other thing is ONE mounting hole is too small for the bolt to go through. I opened it up with a step bit.

I have the seat belt harness plugged in, but I haven't done the airbag wiring as of yet. Haven't figured it out. The monty seats also have the side airbag that the Ranger doesn't have.

EDIT: Other than opening up that one floor mounting hole (on the seat track), there was no modifications to the tracks.

Last edited on Thu Dec 14th, 2017 10:11 pm by mhoward

____________________
-- Michael

2003 Ranger Edge / Extended Cab / Flareside / 3.0L FLEX / 5r44e Auto / 2WD / 8.8 LS 4:10 / Sonic Blue Pearl

So many mods... so little time...