| PM | Quote | Reply | Full Topic |
Joined: Mon Nov 13th, 2017
Location: Pacific North West
Posts: 1587
Status:
Offline
Reputation: 
Reputation Points: $user_rep
[font="Segoe UI", "Helvetica Neue", Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "Fira Sans", "Droid Sans", sans-serif][font="Segoe UI", "Helvetica Neue", Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "Fira Sans", "Droid Sans", sans-serif]allright so when I left off we had finally installed the drivers seat
Now we need to see how the console went together
but first some exterior progress
just FYI the front bumper has also been to paint and is getting installed along with its winch and lights
Some different options for driving lights were considered before finally settling
all bumper bits were cleaned, Primed, and painted, then fit, then final coat
I was looking at running two lights in the hole a 5" round and 3" round, I wanted a driving light at fog...... the hole in the bumper is an odd shape to fit lights into. Then we tried a single 8" led bar and everyone outvoted me......so the single 8" bar is what we are going with. The good news is I get to keep all the cool other lights for our own rigs. These are cheapo's not some $400 Rigid leds but $29 china knock offs
still plenty of room on top for additional forward facing driving lights if wanted later
these little 8" bars have fogs, driving and side shooter leds should be pretty bright FOR OFF ROAD USE ONLY> We will add some actual fog lights down lower that can be used on the street
____________________
I know my crazy! Do you?
2007 Sport 4door 4x4 4.0L SOHC V6 Ranger