View single post by JAMMAN

Posted: Thu Apr 13th, 2023 12:37 am

Quote

Full Topic

JAMMAN
Owns A Torsen

Joined: Mon Sep 18th, 2017

Location: Grove City, Ohio USA

Posts: 6436

Status:

Offline

Reputation:

Reputation Points: $user_rep

Member's Gallery

I finally got the left UCA on and bolts in, will not tighten them since whoever aligns the front end will need to adjust the camber (and caster somewhat...).

I also pressed the lower ball in the same side. I just realized I have NEVER owned a grease gun of my own, I have always been able to borrow one from work. I want my own now.

Ball joints were wasted but not as bad as a couple I have worked on. The shocks were the worst I have ever seen, like a rod in an open bushing. Stabilizer bushings were gone.

I should have the left done by the weekend and plan on tearing the right down.

I won't put the stab bushings in till it is together, much easier to put both on at the same time.

____________________
00 XLT 4WD RCSB 3.GO! JalapeÃ±o
01 XLT 2WD RC Steppie 3.0 auto Silver
The future belongs to those who show up.