| View single post by Mike69 | |||||||||
| Posted: Fri Dec 1st, 2017 04:56 pm |
|
||||||||
|
Mike69 Mustang Nut  Joined: Sun Oct 22nd, 2017
Location: Horsepasture, USA
Posts: 1692
Status:
Offline
Reputation:  Reputation Points: $user_rep
|
Anthony, I am going to add this mod to my Ranger & looking in the wire diagram I have it states the reverse signal comes out of the DTR on the bk/pk wire through a connector l/h side of engine comp, through a plug connector l/h side of safety wall, through plug connector by the trans, through plug connector rear of truck & then back to the reverse light sockets. I can get the reverse signal anywhere along that line? I also have a bk/pk wire from the central junction box (cjb) to the gem & to the rap module, are they the same wire as the feed for the reverse lights?.I hope that is not to confusing.
____________________ 21 Bronco Sport Big Bend (Wife's DD) 05 F150 XLT Reg Cab, 2WD, 5.4L, Auto (My DD) 69 Mustang Coupe 5.0, 5 spd 9" rear(Project) 14 Kawasaki Vulcan (Wife's Toy) |
||||||||
|
| |||||||||