1
View single post by 12° North Industries
 Posted: Tue Sep 21st, 2021 12:21 pm
PM Quote Reply Full Topic
12° North Industries
SITE SPONSOR


Joined: Thu Nov 23rd, 2017
Location: Las Vegas, Nevada USA
Posts: 389
Status: 
Offline
Reputation: 
Reputation Points: $user_rep
Scrambler82 wrote:
12° North Industries wrote:

Should be but... as usual, ford would run out of a color of wire and randomly put something close but no cigar in its place.

 LEFT
Low Beam - light green/black
High Beam - white/light green
Ground - black

RIGHT
Low Beam - light green/black

High Beam - dark blue/light green
Ground - black

Thanks for the wiring list, that helps and shortens the task ahead.

12o , 
Do you happen to know if the pins come out of the socket or do I need to cut and paste wiring ?


All Connectors with very limited few can be un-pinned.

If you're forced into "Cut & Paste", I'd recommend a military splice whether you solder it or not just makes it even better of a splice.

If you wanted to replicate "OUR Anal retentiveness"  I'd suggest spending a few dollars and just source yourself a set of male/female plugs and create a plug & play pigtail, now there's no compromises environment or electrically wise.



Tsquare wrote:
If they are the round pins you will need a tool that will slip over the pin. It will be slightly larger than the pin and it will depress the catch. The tool has a plunger so that you can push the pin out of the housing. You do not want to pull the wire.

If they are the flat pins you can take a small spring hook and reach around the catch to hold it down. I also recommend pushing the male pin out and not pulling on the wire. 

I have seen the wires cut, swapped, and soldered then covered with  heat shrink because they couldn't get the pins out.  (last resort)


https://www.delcity.net/store/Metri!Pack-&-Weather-Pack-Tools/p_804412.h_810949

https://www.delcity.net/store/Metri!Pack-&-Weather-Pack-Tools/p_804412.h_810947

Two best tools ever... for roughly $15 will save you hundreds if not thousands of dollars in headaches and "Oh F&$@ it's!"  Not that we swear in our shop..  nope,.. not us

Last edited on Tue Sep 21st, 2021 12:23 pm by 12° North Industries



____________________
North Industries
Las Vegas, Nevada 89118
Web http://www.12degnorth.com