| PM | Quote | Reply | Full Topic |
Old Bastard !
Joined: Fri Dec 22nd, 2017
Location: California USA
Posts: 2108
Status:
Offline
Reputation: 
Reputation Points: $user_rep
I think it was left off when the FX4 Axle was installed.
Yes, the ABS didn't work and I was having problems, looked more into the actual braking problems and found the disconnected sensor.
But, I didn't get any Warning Lights or code indication when having the vehicle serviced for other things.
I cleaned up the Connectors, connected the Wiring for the ABS to the rear axle, and Wham-Bam the brakes are good to go but nothing about the lighting.
Maybe I did the "BRP" and just can't remember. (BRP = Bulb Removal Procedure)
The Park Warning Light you mentioned in the OP, is that the Light that tells you the Parking Brake is engaged ?
If so, the switch could be the problem, as stated check the Wiring to and from it.
I have found sometimes when I do use the P-Brake, if I don't release the Brake and let it come up by itself and slam home, the light will stay on.
Who knows the switch may have just slipped out of position.
____________________
Ltr,
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Hurst Shifter
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !