View single post by Tsquare

Posted: Sat Nov 14th, 2020 07:46 pm

Quote

Full Topic

Tsquare

Joined: Fri Nov 10th, 2017

Location: Suwanee, Georgia USA

Posts: 1540

Status:

Offline

Reputation:

Reputation Points: $user_rep

Member's Gallery

I got a second coat on the back of the cab, rear bumper, and front of the bed. I will be putting the bed back on tomorrow. I was able to get the doorjam back around to the parts of the passenger door and the entire bed inside and out. It was a thin coat and I mixed a little larger batch. I can see some sanding swirls of the 400 grit paper so I will need to re-visit my sanding. I also had to spend some extra time cleaning my paint gun. I didn't do as good a job as I should have this morning but it is now 100%.

I am going to be sanding and then doing a coat of primer over what does not have new paint where I will sand the primer off with 1000 to 1200 paper over this next week. The weather looks good for finishing the paint job next weekend. I was able to finish at dusk and did not get any pictures. I will take plenty when I put the bed on.

____________________
Tony
NE ATL
'04 XLT regular cab 3.slo stepside
Semi retirement