| PM | Quote | Reply | Full Topic |
Joined: Fri Nov 10th, 2017
Posts: 1540
Status:
Offline
Reputation: 
Reputation Points: $user_rep
Hole in the back of the cab. light rust so it happened in the last few months. It is below the bed line???
Plugged hole. It still needs some primer and another light sanding.
Rust bubble that I ground out.
Again, sandable primer and it will be good.
Another rust bubble.
Primer will finish this.
Freshly washed.
Hood pealing in 2 spots.
Paint worn off the top of the door and just below the window trim.
Sad shape of the clear coat.
I plan on sanding Friday and painting the roof , rear of the cab, outside bed, and inner sides of the bed Saturday morning depending on weather. I have a tempeture range of 50 to 70 degrees with my mix formula. I am doing a single stage so there will be no clearcoat and I hope to get 2 or 3 coats on most of the truck.
I have some work to do to the passenger door as it does not line up with the lines of the truck. The gap for the door to fender is wrong so it will be loosened and readjusted as will the door. I have a small dent in the hood I will adjust with a hammer. I foresee a patch of Bondo and some hood work.
____________________
Tony
NE ATL
'04 XLT regular cab 3.slo stepside
Semi retirement