| View single post by JAMMAN | |||||||||
| Posted: Mon Apr 27th, 2020 10:36 am |
|
||||||||
|
JAMMAN Owns A Torsen  Joined: Mon Sep 18th, 2017
Posts: 6436
Status:
Online
Reputation:  Reputation Points: $user_rep
|
I don't do it that way, I jack the frame up on the side I'm going to work on till the wheel comes off the ground then I let it down till the wheel is just touching the ground. I imagine if you have them cranked this would not relieve all the tension but it works for one that is stock. I've had a couple that people have tried to twist with a 12 point box end wrench probably from Walmart hopelessly rounding the edges. It's a M12 X 1.75 or was on the 2 I replaced. I would measure it though, I have found some strange things on 2000's LOL.
____________________ 00 XLT 4WD RCSB 3.GO! Jalapeño 01 XLT 2WD RC Steppie 3.0 auto Silver The future belongs to those who show up. |
||||||||
|
| |||||||||