1
View single post by 410customs
 Posted: Mon Apr 13th, 2020 10:09 am
PM Quote Reply Full Topic
410customs
Idahome


Joined: Wed May 2nd, 2018
Location: Panhandle, Idaho USA
Posts: 2165
Status: 
Offline
Reputation: 
Reputation Points: $user_rep
that motion seems pretty normal to me
After you installed the rack did you bleed all of the air out?
Basically with both tires jacked up you need to turn the wheel left to right full clock to full clock and keep checking the fluid level in the pump
Do this until no more air comes out and fluid is at level

You can check your toe with a tape measure
You should be 1/4" tow in or 1/8" toe in per side from perfectly straight
So with a tape measure you can measure at the front of the tires and will see like 34-1/2" and at the rear of the tires you should be 34-3/4" (a 1/4" further apart)

If the alignment is off your truck will pull side to side and corner wildly as the tires are not tracking together



____________________
I build custom RBV, specializing in drivetrain conversions, wiring, suspension and complete custom trucks