| View single post by mhoward | |||||||||
| Posted: Mon Feb 24th, 2020 08:29 pm |
|
||||||||
|
mhoward Hey look ~ they ~ bounce!  Joined: Sun Oct 22nd, 2017
Location: Evansville, USA
Posts: 2732
Status:
Offline
Reputation:  Reputation Points: $user_rep
|
Not sure about the blend door being an issue on 2002 and up in particular. Sometimes the electronic actuator will go bad (plastic gears strip or the little motor fries). Some actuators are MECHANICAL... my 2003 EDGE was mechanical until I did the EATC mod and made it all automatic. You can drop the glove box down, shine a light in there and you can see it. Do that while the engine is running and change the temp from cool to hot. You can reach up in there and feel if the spindle moves. Blend door actuator location (as seen from glove box):  Blend door actuators (top view): 
____________________ -- Michael 2003 Ranger Edge / Extended Cab / Flareside / 3.0L FLEX / 5r44e Auto / 2WD / 8.8 LS 4:10 / Sonic Blue Pearl So many mods... so little time... |
||||||||
|
| |||||||||