more updates, tires are here!

AS the interior goes together we are fixing many things. The Ranger door panels have the typical vinyl sag, not going to cut it for this interior so we fixed them.
This is just one example of the kind of detail this build is getting.
Door panel before:


Some foam was trimmed, the vinyl cleaned and stretched, then clamped in place and glued in place using E6000 hobby glue




Just like every single other part the door panels are being re furbished completely before re install.

Now time for the Explorer live axle swap to delete the Ranger PVH
First up we snagged some knuckles wheel bearings and CV's from a 96 4.0 Explorer I have here with only 130K miles
All parts were cleaned and lubed before install. 
New parts are Pro Forged ball joints and sway bar links, all new brakes.
The front end is together and ready to rock the new 32.5" tires





Proforged stuff looks pretty good, time will tell




and finally the new 285 75 r16 Dirt commander MT's!!

Last edited on Sat Dec 7th, 2019 12:01 pm by 410customs