| View single post by mhoward | |||||||||
| Posted: Wed Nov 20th, 2019 11:43 am |
|
||||||||
|
mhoward Hey look ~ they ~ bounce!  Joined: Sun Oct 22nd, 2017
Location: Evansville, USA
Posts: 2770
Status:
Offline
Reputation:  Reputation Points: $user_rep
|
I know this thread is almost two weeks old and most likely the repair has been completed. However, I would like to add for future readers that for the BRACKET bolts, clean the threads thoroughly and use LocTite on the threads. My son (TheArcticWolf1911), had a bracket bolt back off and fall out coming home from work one night. This caused the caliper to pivot out when applying the brake and CUT the aluminum wheel in half. Destroyed two wheels this way before we found out what the problem was. In the dark, everything looked fine and we didn't notice the groove on the backside of the wheel... until it did it a second time with another wheel in less than a mile.
____________________ -- Michael 2003 Ranger Edge / Extended Cab / Flareside / 3.0L FLEX / 5r44e Auto / 2WD / 8.8 LS 4:10 / Sonic Blue Pearl So many mods... so little time... |
||||||||
|
| |||||||||