View single post by JAMMAN

Posted: Thu Dec 6th, 2018 06:35 am

Quote

Full Topic

JAMMAN
Owns A Torsen

Joined: Mon Sep 18th, 2017

Location: Grove City, Ohio USA

Posts: 6436

Status:

Offline

Reputation:

Reputation Points: $user_rep

Member's Gallery

BUTTT this software you can attach the actual document with the attachment button, I have just added XLS to the array of allowable extensions. If the extension on your file is xlsx or something like that just PM me and I'll add it to the list.

It is stored in the MySQL database so it cannot be retrieved as a file from the outside without actually visiting the board.

Your post on another forum.

This is specifically concerning 96 expo v8 2000 ranger 3.0 :

4.......Ignore, same function
13......VSS Ground, ground* on Explorer side, unused on Ranger side
27......Ignore
28......Starter relay Ground on Ranger side, unused on Expo side
35......A/C WOT control on Ranger side, unused on Expo
37......A/C WOT control on Expo side, A/C switch on Ranger side.
41......Ignore -- both sides might be unused
42......Explorer Ground, maybe Ranger alternator power

Fixes:
........C110 = original Ranger 3.0 harness 42 pin connector
........C115 = Explorer 5.0 42 pin connector
........C139 = A/C high pressure's path to ground (below fuse/relay box)
........C1006 = A/C compressor relay

A/C Compressor control:
........Loop C110 pin 37 to C110 Pin 35
........Route C139 pin 5 to C115 pin 37 and to C1006 pin 6
........Remove F1.25 10a fuse for a/c clutch
........Repin relay from NO to NC (Swap pins 2/3)

Tachometer
........Move Pin 8 on 10 pin connector to slot 16 on 16 pin connector at back of instrument cluster

Starter:
........Route C110 pin 28 to Ground, leave C115 pin 28 disconnected

VSS ground
........Route C115 pin 13 to ground
........Leave C110 pin 13 open

PCM ground
........Route C115 pin 42 to ground
........Leave C110 pin 42 open if used

____________________
00 XLT 4WD RCSB 3.GO! JalapeÃ±o
01 XLT 2WD RC Steppie 3.0 auto Silver
The future belongs to those who show up.