1
View single post by JAMMAN
 Posted: Mon Oct 8th, 2018 04:49 pm
PM Quote Reply Full Topic
JAMMAN
Owns A Torsen


Joined: Mon Sep 18th, 2017
Location: Grove City, Ohio USA
Posts: 6436
Status: 
Offline
Reputation: 
Reputation Points: $user_rep
Member's Gallery
 Just evacuated, oiled and charged the latest ranger with a professional grade machine to the specs on the tag under the hood.

Gets cold, but still cycles.

Have proved it is the low pressure switch by shorting it out, stays on.

When pump kicks on at idle, high pressure goes to 100PSI low pressure starts dropping. When the low pressure gets to 25 the clutch kicks out until the low pressure gets to about 35 where it kicks back on again. With the switch shorted out the clutch stays on, the high pressure goes just barely over 100 and the low pressure stabilizes at about 20PSI.

What is that low pressure supposed to be at, because if it is supposed to be below 25 then the switch is bad. If it is supposed to stay higher than 25 then something else is wrong.



____________________
00 XLT 4WD RCSB 3.GO! Jalapeño
01 XLT 2WD RC Steppie 3.0 auto Silver
The future belongs to those who show up.