| PM | Quote | Reply | Full Topic |
Joined: Mon Oct 23rd, 2017
Posts: 144
Status:
Offline
Reputation: 
Reputation Points: $user_rep
There is no way to fill the rad to the neck in terms of a normal rad/cap design. By default the design that ford used on the above tank and rad it will naturally bleed out air pockets into the degaus tank. I'll check the hoses again but everything was replaced 2-3 years ago with new hoses and clamps. I just did all the overflow hoses this year with new clamps. I'm wondering at this point if it's by chance weird electrical gremlins.. I kept getting a rear ABS speed sensor problem when I replaced my Rybestos ABS sensor on the rear diff to an OEM Motorcraft one... this was happening for a week or two. Bought a new Rybestos abs sensor to replace the new Motocraft one and that ABS error code/problem went away and never came back.
I wish my thermostat didn't have that stupid heater/electrical connector. Ford did away with that after a couple years for a normal thermostat.
When I unplug it the truck does see that it's not there which is good. But makes me wonder what might be happening.
-Nigel
____________________
__________
2001 XLT 2.3L
~NSG~