| PM | Quote | Reply | Full Topic |
Old Bastard !
Joined: Fri Dec 22nd, 2017
Location: California USA
Posts: 2108
Status:
Offline
Reputation: 
Reputation Points: $user_rep
The wife wasn't too happy with the idea, and for some reason the Stove went from ours to hers... fast !
As soon as I can get an oven, I will separate the Lenses and the housings, and start work on an aluminum plug that fits the 9007 Bulb Mount. From there my plan is a Plate Jig centered on the 9007 hole that will allow two things, one locating the four Projector mounting holes and two locate the larger hole needed to set the projector back from the Lens, then something to do with JB Weld and probably more than is needed. I think the big thing here is the alignment of the projectors.
Hoping for the best here but if I screw up the housings I will buy set of Spyder Housings and replace the projector in them with the D2S Units.
Thanks for reading,
Ltr
Last edited on Sun Jun 3rd, 2018 12:22 pm by Scrambler82
____________________
Ltr,
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Hurst Shifter
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !