View single post by JAMMAN

Posted: Sun May 6th, 2018 09:39 pm

Quote

Full Topic

JAMMAN
Owns A Torsen

Joined: Mon Sep 18th, 2017

Location: Grove City, Ohio USA

Posts: 6429

Status:

Offline

Reputation:

Reputation Points: $user_rep

Member's Gallery

Everything is going well so far, I actually got a little farther than I thought I would tonight. All the bolts are coming right off, a lot of it is because last year I did brakes and rotors, I cleaned all the screws, tapped all the holes and used copper anti seize compound.

Here is the tire condition that the front end caused:

some pics of the boots as I was disassembling. Took calipers off, brackets, took dust shield off (3 bolts with 8mm heads), Loosen top knuckle bolt, hammer it out, hit the top arm upward with a sledge. Got all the cotter pins out which till I was about 17 I thought were Carter pins because that's what my dad called them. He was a democrat.

Only got to work on it from 6:30 to 8:30 had to fill my vending machines first. That's my 3rd job out of 4.

____________________
00 XLT 4WD RCSB 3.GO! JalapeÃ±o
01 XLT 2WD RC Steppie 3.0 auto Silver
The future belongs to those who show up.